What is the P2119 Code?
The P2119 is a generic OBD-II trouble code that indicates a problem with the throttle actuator control (TAC) system. Specifically, it means "Throttle Actuator Control Throttle Body Range/Performance". This code is triggered when the powertrain control module (PCM) detects that the throttle valve is not in the expected position based on the throttle actuator control motor's commands.
In our workshop, we've encountered the P2119 code across various makes, but it seems to be more prevalent in certain European vehicles. Just last week, we had a BMW 3 Series come in with reduced engine performance and limp mode engaged. After diagnosing the issue, we found that the throttle actuator was faulty, triggering the P2119 code. Similarly, we've seen this code pop up frequently on Volkswagen and Audi models, often due to issues with the throttle position sensor or wiring harness. While not as common, we've also dealt with P2119 on Mercedes-Benz and Volvo vehicles, typically traced back to problems with the electronic throttle control system. In our experience, thoroughly examining the throttle body, position sensors, and wiring is crucial in pinpointing the root cause of this code on European cars.
Urgency and Severity
When the P2119 code is set, it's important to diagnose and fix the issue promptly. Depending on the underlying cause, you may experience symptoms like:
- Reduced engine performance
- Engine going into "limp mode" with limited power
- Rough idling or stalling
- Inability to start the engine in severe cases
If you are experiencing significant drivability issues, it's best to avoid driving the vehicle and have it towed to a mechanic for diagnosis. Continuing to drive with a malfunctioning TAC system can potentially lead to unsafe conditions or further damage.
Applicability
The P2119 is a generic code that can apply to any vehicle with an electronic throttle control (ETC) system, also known as drive-by-wire. This includes most modern vehicles from various makes like Ford, GM, Toyota, Honda, BMW, etc. However, the specific components and diagnostic procedures may vary somewhat between different vehicle makes and models.
Buy tested tuning file for Adblue / EGR / DPF / Adblue off now!
Parts Involved
The main components of the TAC system that can trigger a P2119 code include:
- Throttle body: Houses the throttle valve and throttle position sensor (TPS). Controls airflow into the engine.
- Throttle actuator control motor: Electronically adjusts the throttle valve position based on PCM commands. Integral to the throttle body.
- Accelerator pedal position sensor (APPS): Sends the gas pedal position to the PCM.
- Powertrain control module (PCM): Controls the TAC system and sets the code if a problem is detected.
Common Causes
Some of the typical reasons the P2119 code may be triggered include:
- Faulty throttle position sensor
- Damaged throttle actuator motor
- Dirty or sticking throttle body
- Corroded or damaged wiring/connectors in the TAC circuit
- Faulty PCM (rare)
Diagnosis Steps
- Scan for codes and document freeze frame data.
- Visually inspect the throttle body and wiring. Clean the throttle body if dirty.
- Use a scan tool to observe live data from the TPS and APPS. Look for irregular or erratic readings.
- Test the throttle actuator motor and TPS circuits for proper voltage and resistance per manufacturer specs.
- If no wiring issues are found, perform a throttle relearn/adaptation procedure.
- Test drive and rescan to see if the code returns.
Repair Solutions
Fixes for a P2119 code may involve:
- Cleaning the throttle body if it is sticking
- Replacing a faulty throttle position sensor
- Replacing a damaged throttle actuator motor
- Repairing damaged wiring or connectors
- Replacing the PCM if faulty (rare)
Always follow the manufacturer's recommended diagnostic and repair procedures for the specific vehicle.
Repair Cost
The cost to fix a P2119 code can vary significantly depending on the root cause and the vehicle make/model. Some rough estimates for common repairs:
- Throttle body cleaning: $50-150 USD (€45-135 EUR)
- Throttle position sensor replacement: $100-300 USD (€90-270 EUR)
- Throttle body/actuator replacement: $300-1000+ USD (€270-900+ EUR)
- Wiring repairs: $100-300 USD (€90-270 EUR)
Diagnostic labor and any additional parts would be extra. Always get a quote from a trusted mechanic before authorizing repairs.
Prevention
Some ways to help prevent TAC system issues include:
- Regularly inspecting and cleaning the throttle body every 50,000-100,000 km (30,000-60,000 miles).
- Addressing any related codes promptly. The P2119 may appear with other TAC codes like P2135, P2138, P2101, etc.
- Avoiding aftermarket "performance chips" that can alter throttle mapping.
By understanding the P2119 code and following proper diagnostic and repair steps, you can restore proper throttle control and get your vehicle running smoothly again. If you are unsure about tackling the diagnosis and repair yourself, it's always best to consult with a qualified mechanic to ensure the job is done right.
Frequently Asked Questions About the P2119 Code
What does the P2119 OBD-II code mean?
The P2119 code indicates a problem with the throttle actuator control (TAC) system. Specifically, it means “Throttle Actuator Control Throttle Body Range/Performance,” signaling that the throttle valve is not in the expected position based on the throttle actuator control motor’s commands.
What are the common symptoms of a P2119 code?
Common symptoms include reduced engine performance, the engine going into “limp mode” with limited power, rough idling or stalling, and in severe cases, the inability to start the engine.
How serious is the P2119 code?
The severity can range from moderate to severe depending on the underlying cause. If you experience significant drivability issues, it’s best to avoid driving the vehicle and have it diagnosed promptly to prevent unsafe conditions or further damage.
What vehicles can be affected by the P2119 code?
The P2119 is a generic code that can apply to any vehicle with an electronic throttle control (ETC) system, also known as drive-by-wire. This includes most modern vehicles from various makes like Ford, GM, Toyota, Honda, BMW, etc.
What are the main components involved with the P2119 code?
The key components include the throttle body (which houses the throttle valve and throttle position sensor), throttle actuator control motor, accelerator pedal position sensor (APPS), and the powertrain control module (PCM) that controls the TAC system.
What are common causes of a P2119 code being triggered?
Common causes include a faulty throttle position sensor, damaged throttle actuator motor, dirty or sticking throttle body, corroded or damaged wiring/connectors in the TAC circuit, and in rare cases a faulty PCM.
What are the typical diagnostic steps for a P2119 code?
Diagnosis involves scanning for codes, visually inspecting the throttle body and wiring, observing live data from the TPS and APPS sensors, testing the throttle actuator motor and TPS circuits, performing a throttle relearn procedure if needed, and test driving to see if the code returns.
How can a P2119 code be fixed?
Fixes may involve cleaning a sticking throttle body, replacing a faulty throttle position sensor or damaged throttle actuator motor, repairing damaged wiring or connectors, or in rare cases replacing a faulty PCM. Always follow the manufacturer’s recommended diagnostic and repair procedures.
What is the typical cost to repair a P2119 code?
The cost can vary significantly depending on the root cause and vehicle. Throttle body cleaning may cost $50-150 USD (€45-135 EUR), a TPS sensor replacement $100-300 USD (€90-270 EUR), a throttle body/actuator replacement $300-1000+ USD (€270-900+ EUR), and wiring repairs $100-300 USD (€90-270 EUR). Diagnostic labor and any additional parts would be extra.
Can I drive with a P2119 code?
While you might be able to drive short distances, it’s not recommended. Driving with a P2119 code can worsen the problem and potentially lead to more severe issues.
Can I fix the P2119 code myself?
If you’re mechanically inclined, you might be able to clean the throttle body yourself. However, diagnosing and fixing other issues often requires specialized tools and expertise, so it’s best to consult a qualified mechanic.
What kind of scanner do I need to diagnose the P2119 code?
For European car owners, having a reliable dealer-level scanner is paramount. These scanners provide in-depth access to your car’s systems, allowing for accurate diagnosis and efficient repairs.
How can I prevent TAC system issues that cause a P2119 code?
Prevention includes regularly inspecting and cleaning the throttle body every 50,000-100,000 km (30,000-60,000 miles), addressing any related codes promptly, and avoiding aftermarket “performance chips” that can alter throttle mapping.
What other codes may appear along with the P2119?
Related TAC system codes that may appear with the P2119 include P2135, P2138, P2101, P2107, P2108, P2111, P2112, and P2118.
What units are used for the diagnostic specs and repair costs?
Diagnostic specifications like voltage and resistance will be in metric units. Repair costs are provided in both US Dollars and Euros. Mileage is given in both kilometers and miles.
What happens if I ignore the P2119 code?
Ignoring the code can lead to reduced engine performance, increased emissions, and poor fuel economy. In severe cases, it may cause catalytic converter damage or the inability to start the engine.
How long does it take to diagnose and repair a P2119 code issue?
Diagnosis can take 1-2 hours depending on the specific issue. Repair time can range from 1 hour for a throttle body cleaning to 4+ hours for a throttle body, wiring harness, or PCM replacement.
Will the P2119 code clear itself after repairs are made?
The code should clear after repairs if all the issues have been properly resolved. However, it’s best to clear the code with a scan tool and then test drive to verify the fix. If the code returns, further diagnosis is needed.
What is “limp mode” in relation to the P2119 code?
Limp mode is a safety feature where the PCM limits engine performance, often locking the throttle to a set position, if a serious problem is detected with the TAC system. This allows you to “limp” the vehicle to a safe location but with very limited speed and power.
Where can I find more information specific to my vehicle for the P2119 code?
Consult the factory repair manual or technical service bulletins (TSBs) for your specific vehicle make, model, and year. These resources will have detailed diagnostic and repair procedures, wiring diagrams, and component locators tailored to your vehicle.