P0174 – System Too Lean Bank 2

Understanding the P0174 Engine Code

The P0174 code indicates that the fuel mixture is too lean (too much air/too little fuel) in bank 2 of the engine. This is a generic powertrain code that applies to many makes and models. While you can usually continue driving with a P0174, it's best to diagnose and fix the underlying issue promptly to prevent potential engine damage.

How Urgent is a P0174 Code?

In most cases, you can keep driving for a short time with a P0174 code. However, driving with a lean condition for too long can cause issues like:

• Rough running
• Lack of power
• Hesitation
• Overheating
• Backfiring
• Catalytic converter damage

It's best to diagnose the problem as soon as possible. If the engine is running very roughly or misfiring, avoid driving the vehicle and have it towed to a mechanic for diagnosis and repair.

Parts Involved

The P0174 code involves the fuel and air metering systems on bank 2 of the engine (the side of the engine that does not contain cylinder #1). Key components include:

• Fuel injectors
• Fuel pressure regulator
• Fuel pump
• Mass airflow (MAF) sensor
• Manifold absolute pressure (MAP) sensor
• Oxygen (O2) sensors
• Vacuum lines
• Exhaust leaks

These parts work together to meter the proper amount of fuel and air for the engine. Issues with any of these components can cause a lean condition and trigger a P0174.

Common Causes

Some of the most common causes of a P0174 include:

1. Vacuum leaks
2. Clogged fuel filter
3. Weak fuel pump
4. Leaking or clogged fuel injectors
5. Exhaust leaks
6. Dirty MAF sensor
7. Faulty O2 sensors

Less common causes can include a faulty fuel pressure regulator, worn fuel pump, or issues with the PCM.

Diagnosing a P0174

To diagnose a P0174 code, a mechanic will typically follow these steps:

1. Scan for other codes. Additional codes like P0171, P0300, P0301, etc. can help narrow down the issue.

2. Visually inspect vacuum lines, hoses, intake manifold gaskets, and other components for obvious leaks.

3. Perform a fuel pressure test to check for low pressure from a clogged filter, weak pump, or leaking injectors or regulator.

4. Check the exhaust for leaks before or near the O2 sensors.

5. Test the MAF and MAP sensors and clean the MAF if dirty.

6. Test the O2 sensors for proper operation.

7. If no other issues are found, suspect a leaking or clogged fuel injector.

Repair Costs

The cost to fix a P0174 code varies widely depending on the underlying cause:

• Vacuum leak: $50-$200
• Exhaust leak: $100-$600
• MAF sensor: $200-$400
• O2 sensor: $200-$500
• Fuel pump: $400-$1000
• Fuel injectors: $500-$1200

Typical parts costs are:

• Vacuum lines/hoses: $5-$50
• Intake gaskets: $20-$100
• MAF sensor: $100-$300
• O2 sensor: $50-$200
• Fuel pump: $100-$600
• Fuel injectors: $50-$500 each

For minor fixes like replacing vacuum hoses or fuel filters, expenses may range from as little as $20 to $100 when opting for DIY repairs.

Preventing a P0174

To help prevent a P0174 code from occurring:

• Change the fuel filter every 30,000 miles (48,000 km)
• Use high-quality fuel from Top Tier gas stations
• Have the fuel injectors cleaned every 60,000 miles (96,000 km)
• Address any rough running, misfires or loss of power promptly
• Fix exhaust leaks immediately

Related Issues

A P0174 code often occurs in conjunction with other lean codes like P0171 (bank 1 lean) and misfire codes like P0300, P0301, P0302, etc. A vacuum leak or low fuel pressure issue will typically trigger lean codes on both banks while a leaking injector may only affect one cylinder and bank.

Hopefully this in-depth look at the P0174 engine code helps you better understand this issue and how to resolve it. As always, proper diagnosis is key to avoiding unnecessary repairs. If you're currently getting a P0174 code, it's best to have it checked out by a professional mechanic as soon as possible to prevent potential engine damage.

Frequently Asked Questions About P0174 Code

What does the P0174 code mean?

The P0174 code indicates that the fuel mixture is too lean (too much air/too little fuel) in bank 2 of the engine. This means the air-fuel ratio is out of balance, and there is an excess of air or insufficient fuel getting to the engine’s cylinders on that side.

What are the common symptoms of a P0174 code?

Common symptoms that may occur along with a P0174 code include:

• Check engine light is on
• Rough idle or high idle
• Lack of power
• Hesitation or stumbling during acceleration
• Engine misfire
• Stalling

How serious is a P0174 code?

A P0174 code should be considered moderately severe. While it is usually safe to drive short distances with this code, driving for extended periods can potentially cause damage to the engine, catalytic converter, and oxygen sensors. The underlying issue should be diagnosed and repaired as soon as possible.

What are the common causes of a P0174 code?

Some of the most common causes that can trigger a P0174 lean code include:

• Vacuum leaks
• Clogged fuel filter
• Weak fuel pump
• Leaking or clogged fuel injectors
• Exhaust leaks
• Dirty or faulty mass airflow (MAF) sensor
• Faulty oxygen (O2) sensors

Other potential causes include a leaking PCV valve, EGR system issues, and faulty coolant temp sensors.

How do you diagnose the cause of a P0174 code?

Diagnosing a P0174 involves a systematic approach to finding the root cause:

1. Check for any other codes that may help pinpoint the issue.
2. Visually inspect all vacuum lines, hoses, and intake components for leaks.
3. Perform a fuel pressure test to check for low pressure from the pump, filter, or injectors.
4. Check the exhaust for any leaks, especially near the O2 sensors.
5. Inspect and test the MAF sensor and clean it if dirty.
6. Test the O2 sensors and replace them if faulty.
7. If no other issues are found, suspect a leaking or clogged fuel injector.

Using an OBD-II scan tool to monitor live data can also help identify the cause. Consulting vehicle-specific repair information is recommended for further diagnostic steps.

How much does it cost to fix a P0174 code?

The cost to repair a P0174 code varies widely depending on the root cause:

• Vacuum leak: $50-$200
• Exhaust leak: $100-$600
• MAF sensor: $200-$400
• O2 sensor: $200-$500
• Fuel pump: $400-$1000
• Fuel injectors: $500-$1200

Diagnostic costs are typically around $100. Total repair costs can range from $150 for something simple like a vacuum leak up to $1000+ if the fuel pump or injectors need replacing.

Can you drive with a P0174 code?

In most cases, you can drive safely for short distances with a P0174 code. However, it’s best to diagnose and repair the issue as soon as possible to avoid potential engine damage and poor performance. If the engine is running roughly, misfiring, or stalling, do not continue to drive it.

How do you fix a P0174 code?

Fixing a P0174 code depends on the underlying cause. After diagnosing the issue, repairs may involve:

• Replacing damaged vacuum lines or hoses
• Cleaning the MAF sensor
• Replacing the fuel filter, pump, or injectors
• Replacing one or more O2 sensors
• Repairing exhaust leaks
• Replacing the PCV valve or other faulty components

In some cases, simply cleaning the MAF sensor or replacing an old fuel filter may resolve the issue. More complex problems like a failed fuel pump will require more extensive repairs.

Can a vacuum leak cause a P0174?

Yes, vacuum leaks are one of the most common causes of a P0174 lean code. Any leak in the intake system after the MAF sensor can allow unmetered air to enter, throwing off the air-fuel ratio. Even small leaks in vacuum lines or the intake manifold can trigger this code.

Can a bad O2 sensor cause a P0174?

Yes, a faulty oxygen sensor can cause a P0174 code. The O2 sensors monitor the exhaust to determine how rich or lean the air-fuel mixture is. If an O2 sensor fails or gives inaccurate readings, it can cause the computer to incorrectly adjust the fuel trim and trigger a lean code.

Can a clogged fuel filter cause a P0174?

Yes, a clogged fuel filter can restrict fuel flow and cause a lean condition, triggering a P0174 code. If the filter is excessively dirty or plugged, not enough fuel will reach the engine. This is more common on older high-mileage vehicles.

Can a bad fuel pump cause a P0174?

Yes, a weak or failing fuel pump can trigger a P0174 code. If the pump cannot maintain adequate fuel pressure, not enough fuel will be injected into the engine. This is more likely to occur at higher RPMs when fuel demand is greatest.

Can dirty fuel injectors cause a P0174?

Yes, dirty or clogged fuel injectors can cause a P0174 lean code. If one or more injectors are restricted, not enough fuel will be sprayed into the cylinders. The insufficient fuel can trigger a lean code and cause misfires or rough running.

Will a P0174 code clear itself?

No, a P0174 code will not clear on its own, even if the underlying problem is repaired. The code will remain stored in the vehicle’s computer until it is cleared with an OBD-II scanner. The check engine light may turn off after several drive cycles if the issue is resolved.

How do you clear a P0174 code?

A P0174 code can be cleared using an OBD-II scanner. However, the code should only be cleared after the underlying problem has been properly diagnosed and repaired. If the code is cleared without repairing the cause, it will likely return and trigger the check engine light again.

Can an exhaust leak cause a P0174?

Yes, an exhaust leak near one of the oxygen sensors can allow outside air to enter the exhaust stream. This can cause inaccurate O2 sensor readings and trigger a P0174 lean code. Leaks are most likely to occur at the exhaust manifold or just in front of the O2 sensors.

Can a bad MAF sensor cause a P0174?

Yes, a dirty, contaminated, or failing mass airflow sensor can trigger a P0174 code. The MAF sensor measures incoming airflow. If the sensor under-reports the amount of air entering the engine, the computer will not inject enough fuel, causing a lean condition.

Can low fuel pressure cause a

P0174?

Yes, low fuel pressure can cause a lean condition and P0174 code. If there is not enough pressure in the fuel system, the injectors will not be able to spray sufficient fuel into the cylinders. Low pressure can be caused by a clogged filter, weak pump, or leaking injectors.

What does a P0174 code mean on a Chevy?

A P0174 code on a Chevy indicates that bank 2 of the engine is running lean (too much air/not enough fuel). Bank 2 refers to the side of the engine that does not contain cylinder #1. The causes and symptoms are the same as with other vehicles.

What does a P0174 code mean on a Ford?

On a Ford, a P0174 code has the same meaning as with other makes – there is a lean condition in bank 2 of the engine. Common causes on Fords include vacuum leaks, MAF sensor issues, and leaking fuel injectors. The code should be diagnosed and repaired promptly.